Using the Electric Shaver correctly can not only obtain a satisfactory shaving effect but also ensure the use safety and prolong the service life of the Electric Shaver.
- Generally, it is not suitable to shave when the beard is too long. If the beard is too long, it is best to use a dual-purpose Electric Shaver with a trimmer. Or first, use small scissors to roughly cut the beard shorter, and then use an Electric Shaver, so the effect is better.
- Dry your face before shaving. It is best to slightly tighten the facial skin with your fingers, touch the skin at right angles to the beard, and gently move the Electric Shaver by drawing a circle.
- Electric Shavers should not be used for people with allergic reaction constitution, and when the body is tired, there are wine thorns and swollen sores on the face, and the skin has a fever, itching, or rash.
- When installing and disassembling the Electric Shaver, be sure to disconnect the power supply and stop the motor rotation or electromagnetic vibration, otherwise, there is a risk of cutting. Due to the sharp edge at the front end of the inner razor, special attention should be paid during installation and disassembly.
- Shavings and dandruff can easily be hidden in the edges and pores of the internal and external knives. Try to clean them with a small brush after each use. Since the solidification of shavings and skin oil will hinder the movement and sharpness of the blade, the sundries left on the blade must be removed frequently.
- As the outer knife is thin, do not push it hard to avoid deformation. When the knife is used, it will hinder the shape of the skin or change the shape of the skin. If the cutting edge is deformed and damaged, it should not be used again, otherwise, there will be a risk of cutting.
- For the Electric Shaver of carbon brush motor, the use time should not be too long each time. Otherwise, the carbon brush and commutator of the motor will be worn and the rotating force will be weakened.
- To maintain the service performance of the battery, it should be used in the range of 0 -40 ℃ ambient temperature. When not in use for a long time, the dry battery should be taken out and stored to avoid damaging the internal parts due to liquid leakage.
- When charging a rechargeable shaver, switch on the off position and charge it with the power supply with the corresponding voltage. Pull out the plug immediately after charging. The battery of the rechargeable shaver will discharge automatically if it is not used for a long time after charging, which will reduce the electromotive force. Therefore, when it is placed for more than three months, it should be recharged before use. Continuous charging for more than two days can shorten the service life of the battery, so it should be avoided.
- Regularly (once a week) apply a little knife lubricating oil on the inner surface of the outer knife. Some rotating parts such as the inner knife support shaft or motor spindle also need to be lubricated. When refueling, drop a small drop of oil on your finger, then wipe the axis, or use a small wooden stick to guide the drop, but pay attention to the amount of oil.
- The switch shall be kept clean. If there is too much oil accumulation, it will affect the power on performance and cause the motor to work abnormally.
- For shavers using alternating current, avoid using and plugging in and out the plug with wet hands when taking a bath, otherwise there will be a risk of electric shock.
- Disconnect the switch after use. To protect the blade, the protective cover must be put on, then put into the box, and store the Electric Beard Shaver in a dry place.
- Alcohol, banana water, or other volatile chemicals shall not be used for wiping and cleaning.
Searching for the Best Electric Back Shaver supplier from China, you can get high-quality products at a nice price.
